Oculus Quest 2 Player App Set-Up Instructions (for Whitelabel/SCORM users)

Directions from unboxing the headset to downloading the app to launching to getting started with the VR simulations.

Quest 2 Set up and Interplay Player App Install Process 

Unbox Oculus Headset

Watch this video from Oculus with Quest 2 device setup instructions:  https://www.youtube.com/watch?v=ZBSiZ5Pcjjg


STEP 1: Unbox the Hardware

Before you put the headset on, remove the battery taps from the Touch controllers to activate them. The headset itself should have around 40% battery charge out of the box. Also, take note of your Wi-Fi and password.


STEP 2: Put on Your Headset

Press the power button on the right side of the headset for 2 seconds to power the headset, and put the headset on. Adjust the straps so that the headset can fit your head. 

The controllers will pair automatically with the headset. 


STEP 3: Choose Your Language

Next, choose your preferred language by selecting your option and using your touch controller to confirm.


STEP 4: Connect Your Headset to Wi-Fi

Select your Wi-Fi and enter the password to connect your headset. At this point, the headset requires an update which will take up to 5 minutes. 


STEP 5: Download the Oculus Mobile App

Go to the Apple or Android store download the "Oculus Mobile" app on your smartphone. Once the update is complete, put the headset on and pair the Quest 2 to the Oculus mobile app on your phone.

Enter the pairing code displayed on the headset into the Oculus app in order to sync the two together.

NOTE: You will either have to connect your current Facebook account or create a Facebook account on this step.***

*** It is recommended that if you have a Facebook account, use that account. It is not recommended to create a second account.  If you do create a second account you want to make sure that you are logged in to the same account on both the headset and Oculus app on your phone. 


Setup Your Guardian Boundary

The final step in the Quest 2 setup is to configure the guardian boundary system. This is the safe space in your room you will play a virtual reality in. The guardian is meant to protect you so that you won’t hit the wall or furniture when you are playing VR.

STEP 1: Room and Guardian Setup

Once prompted, lower the controller to the floor and press the trigger button. This will set the height of your boundary

Next, draw the boundary by pulling the trigger and drawing a boundary around your "safe area" or open area. 

Congratulations you have now successfully set up your headset! Almost there! 


Downloading Interplay Learning Player App

STEP 1: Select the Interplay Learning Player App

Once you have completed your headset setup, now it's time to get started in our app. Download the Interplay Player App (available via phone or computer) using the following link*:  https://www.oculus.com/experiences/quest/4325901304108120/   

*Please note the app must be downloaded via the account attached to your setup above. 


STEP 2: Download the App

On the download page, you will select the blue "Free" button (a warning will pop up telling you to make sure you have enough room for VR). Select "Okay".


STEP 3: Confirm download

Next, the screen goes away, the "Free" button says "Purchased" for just a second. Then it will look like the image below and it will now be available in your headset!

STEP 4: Find the app in the headset

Put on your headset and search for the app in your headset, which displays as a white block with "Interplay Learning". Select the app.

STEP 5: Get started!

Search your company name and then:

  1. Enter your login information
  2. Navigate to the Course you are wanting to launch


Using Quest 2 Headset with Interplay Learning

As you prepare to get started in your Quest 2 headset, watch this onboarding video to familiarize yourself with the controllers, navigation, etc.: https://www.interplaylearning.com/en/help/vr-onboarding   


CONGRATS You have set up your headset and are ready to launch!